Clear Glass Bathroom Shelf with Chrome Brass Holder

The item's weight bearing will be dependent on installation and if installed correctly, the product cannot exceed 20 lbs.

1) Measure and level two points on the wall where you wish to mount the shelf, 16 inches apart and mark them. These will be where your shelf arms are mounted.
2) Unscrew the small allen screws found on the shelf arms that release the mounting plates.
3) Position your mounting plates centered over your marks and use the two furthest holes to mark your drill points.
4) Using a small 1/8 " bit , drill your holes.
5) Push the grey plastic anchors provided into your drilled holes ( do not push them all the way into the wall).
6) Using the set screws provided, tighten the mounting plates to the wall into the anchors.
7) Slide the chrome shelf arms over the mounting plates, flush against the wall, so that the allen screw is hidden on the under side of the shelf.
8) Tighten the allen screws, fastening the shelf arm to the mount.
9) loosen the larger Phillips head screws on the under side of the arms until you can slide and center the glass shelf into the slots. (Flat side of the shelf parallel to the wall).
10) Slowly tighten the screws until it becomes snug. DO NOT OVER TIGHTEN AS YOU WILL BREAK THE GLASS.