A
The mounting hardware included with the sink is two 8 mm bolts with corresponding nuts, washers and plastic sleeves. This will hold and install the sink securely when installed properly into studs. If you would like additional support, brackets or carrier bars can be purchased at a local hardware store.
The mounting hardware included with the sink is two 8 mm bolts with corresponding nuts, washers and plastic sleeves. This will hold and install the sink securely when installed properly into studs. If you would like additional support, brackets or carrier bars can be purchased at a local hardware store.
- To mount the sink onto the wall, you must locate studs in the wall and drill holes into the wall for the corresponding bolts. If the studs in the wall do not line up with the pre-drilled holes in the sink, you may secure a piece of wood with angled screws to the studs so that the holes will line up properly and ensure the stability of the mounting.
- The bolts will thread through the holes already drilled in the sink and into the wall.
- The bolt side will thread through the sink and secured with washers and nuts.
- The screw side of the bolt will go into the plastic sleeves and into the wall.
Following these mounting instructions with the hardware included will be more than sufficient to support wall mounted installation.
